WinXP audio line-in recording questions.
January 8, 2004 8:57 PM Subscribe
Can anyone recommend a cheap (or Freeware) application for recording to mp3 (or something I can convert) from a line in that runs under WinXP?
I need to record a half an hour to an hour long DJ set to mp3 for a demo.
I need to record a half an hour to an hour long DJ set to mp3 for a demo.
Response by poster: cool - Audacity looks like just the thing. One other question on this topic - is there a way to get Windows to send the audio from the line in right back out to the line out? I don't have a splitter on hand right now, so I want to run a line out to my monitor speakers from my laptop (instead of from my mixer, whose output is now directed to the laptop input.)
thanks
posted by badstone at 9:26 PM on January 8, 2004
thanks
posted by badstone at 9:26 PM on January 8, 2004
>is there a way to get Windows to send the audio from the line in right back out to the line out?
Open the Volume Control again. Unmute "Line In". If it's not there, check it in Option->Properties.
HTH!
posted by shepd at 5:54 AM on January 9, 2004
Open the Volume Control again. Unmute "Line In". If it's not there, check it in Option->Properties.
HTH!
posted by shepd at 5:54 AM on January 9, 2004
Audacity is probably a good choice (I use it to edit sound files and I'm happy with it). The excellent Open Source ripper CDEX will also record directly from analog input.
posted by magullo at 9:38 AM on January 9, 2004
posted by magullo at 9:38 AM on January 9, 2004
Response by poster: there is no way to unmute the line in it seems. In play mode I have: Volume Control, Wave, SW Synth, CD Audio, and PC Speaker, none of which are muted. In record mode, I just have CD Audio and Microphone. (Microphone is my line in.)
posted by badstone at 11:23 AM on January 9, 2004
posted by badstone at 11:23 AM on January 9, 2004
badstone: The Playback and Recording controls operate independently. Go back into Options > Properties from the Volume Control, make sure Playback is selected, and scroll through the "Show the following volume controls" list to make sure that Line In is checked. Then click OK.
posted by Danelope at 1:45 PM on January 9, 2004
posted by Danelope at 1:45 PM on January 9, 2004
This thread is closed to new comments.
1. Open the Windows Volume Control
2. Go to Options > Properties
3. Select the Recording radio button
4. Make sure that Line-In is checked in the list below
5. Click OK, which brings up the Recording panel
6. Mark the checkbox below Line-In and make sure the volume is up
7. Start recording
If your audio recorder doesn't encode directly to MP3, you can find any number of WAV to MP3 encoders online.
posted by Danelope at 9:13 PM on January 8, 2004