Electronic Drums with an old analogue Reciever
June 10, 2008 7:55 AM Subscribe
Can I plug a Yamaha DT Explorer Drum kit into the AUX channel on my old Harmon Kardon analogue receiver with a set of big Mission speakers? .. or will something bad happen….?
Best answer: It won't blow up, if that is what you are asking.
I'd use line-out from the drum kit to line-in on the HK. Line levels are 1Vpp, nominal. Headphones are usually high impedance.
Start out with the volume low! (Neighbors might want you to keep it that way, too.)
posted by FauxScot at 9:08 AM on June 10, 2008
I'd use line-out from the drum kit to line-in on the HK. Line levels are 1Vpp, nominal. Headphones are usually high impedance.
Start out with the volume low! (Neighbors might want you to keep it that way, too.)
posted by FauxScot at 9:08 AM on June 10, 2008
Just keep the levels low to begin with, as FauxScot says. Should be okay... might be a bit of noise on the line. Otherwise, take your drum and beat it.
posted by Guy_Inamonkeysuit at 9:38 AM on June 10, 2008
posted by Guy_Inamonkeysuit at 9:38 AM on June 10, 2008
This thread is closed to new comments.
posted by stenseng at 8:13 AM on June 10, 2008