Slow Down?
December 7, 2008 11:15 AM
Is there any way to slow down the CPU in my Dell Latitude D830 running Windows XP Pro?
My last laptop, a Toshiba, had a utility for controlling the CPU speed. I liked to slow it down to avoid heat and fan noise at times. Is there a way to do that on my Dell? I've looked through the utilities that came with the machine, and googled, but I can't find anything.
My last laptop, a Toshiba, had a utility for controlling the CPU speed. I liked to slow it down to avoid heat and fan noise at times. Is there a way to do that on my Dell? I've looked through the utilities that came with the machine, and googled, but I can't find anything.
Thanks, nitsuj. I took a look at Speedswitch XP. It's CPU speed options are
posted by king walnut at 11:47 AM on December 7, 2008
- max performance
- max battery
- battery optimized
- dynamic switching
posted by king walnut at 11:47 AM on December 7, 2008
The power management utilities will probably have this feature.
posted by caddis at 11:49 AM on December 7, 2008
posted by caddis at 11:49 AM on December 7, 2008
Other suggestions to avoid fan noise. . . the thermal paste that manufacturers use between the hot CPUs and the factory heatsink/fan combos is usually very low grade. I saw an article once about a guy who put really high quality arctic silver 5 between the two, and it made the fan run much less. Also, keeping the computer dust-free inside will minimize the fan's having to spin up as much.
posted by No New Diamonds Please at 11:49 AM on December 7, 2008
posted by No New Diamonds Please at 11:49 AM on December 7, 2008
> The power management utilities will probably have this feature.
Thanks. I've looked through all the utilities that came with the machine, and also the Windows XP Power Options control panel applet. If it's there, I can't see it.
posted by king walnut at 11:55 AM on December 7, 2008
Thanks. I've looked through all the utilities that came with the machine, and also the Windows XP Power Options control panel applet. If it's there, I can't see it.
posted by king walnut at 11:55 AM on December 7, 2008
Your Dell is already using speedstep which is Intel's implemetation of slowing down the processor for you. In other words: its already being done. Monkeying with it manually will give you worse results not better. Your old toshiba probably didnt have speedstep, thus the manual config.
>liked to slow it down to avoid heat and fan noise at times.
Youve got a machine in your hands that has two cores and a modern GPU. I seriously doubt you'll find a config that will stop the fan without destroying the laptop with overheat. Let the fans do their job.
posted by damn dirty ape at 5:43 PM on December 7, 2008
>liked to slow it down to avoid heat and fan noise at times.
Youve got a machine in your hands that has two cores and a modern GPU. I seriously doubt you'll find a config that will stop the fan without destroying the laptop with overheat. Let the fans do their job.
posted by damn dirty ape at 5:43 PM on December 7, 2008
BTW, you can disable one core via boot.ini or in the MSCONFIG utility. More info in this thread. I doubt you'll see much improvment as the one core will just work twice as hard, but you can play with it if you like.
posted by damn dirty ape at 5:48 PM on December 7, 2008
posted by damn dirty ape at 5:48 PM on December 7, 2008
Thanks damn dirty ape, but I realize the Dell is already dynamically altering the cpu speed. The range seems to be from 1.6 GHz to 2.2 GHz. However, the machine runs MUCH cooler at 1.6 than at 2.2, and there seems to be several levels of fan: at 1.6, it's barely audible; at 2.2 it's disturbingly noisy.
So, I'd like to set the cpu speed to 1.6 and let the fans respond as they would normally, and cut way down on the heat.
The Toshiba (R-100) also dynamically changed cpu speeds, but you could set it at low speed if you wanted.
posted by king walnut at 6:13 PM on December 7, 2008
So, I'd like to set the cpu speed to 1.6 and let the fans respond as they would normally, and cut way down on the heat.
The Toshiba (R-100) also dynamically changed cpu speeds, but you could set it at low speed if you wanted.
posted by king walnut at 6:13 PM on December 7, 2008
I am typing this on my own D830, coincidentally. I am running Vista, and it has an option inside the advanced power settings that allows you to set the minimum and maximum cpu speeds, both on AC power and on battery.
(for your edification, it seems faster with Vista (and Aero Glass) than it did with the XP that same with it. But I did get the upgraded video card.)
I didn't find anything on a quick google search about that kind of granularity in the XP power settings.
Also, I never hear the fan. Perhaps you have processes running that don't need to be running that are taking up all your cpu time?
posted by gjc at 6:31 PM on December 7, 2008
(for your edification, it seems faster with Vista (and Aero Glass) than it did with the XP that same with it. But I did get the upgraded video card.)
I didn't find anything on a quick google search about that kind of granularity in the XP power settings.
Also, I never hear the fan. Perhaps you have processes running that don't need to be running that are taking up all your cpu time?
posted by gjc at 6:31 PM on December 7, 2008
I jnust looked in the BIOS, and there's a setting under performance called (something like) "enhanced speedstep". Two options- on and off. It says that in off mode, it reverts to the lowest performance mode of the processor. That might be it.
posted by gjc at 6:50 PM on December 7, 2008
posted by gjc at 6:50 PM on December 7, 2008
« Older What should I read if I love Clan of the Cave Bear... | At-home literacy and spelling help for seniors? Newer »
This thread is closed to new comments.
posted by nitsuj at 11:31 AM on December 7, 2008