restore SMC switch to default
March 13, 2008 3:56 PM

Does anyone know how to reset a SMC 8624T switch to factory settings?

I have a SMC 8624T tigar switchs that I don't know the password, and the admin that set it up in no longer available. We called SMC and they want us to ship it back to them, but that seems absurd to me. Plus we need to use it now.
posted by brent_h to Computers & Internet (5 answers total) 1 user marked this as a favorite
Get the management manual here. You should be able to connect right up via the serial console to change the password. If that doesn't work, the manual has the relevant info.
posted by Cat Pie Hurts at 4:21 PM on March 13, 2008


I actually read through the manual - the specific are in Appendix A Troubleshooting.
Hook up via serial, CTRL-F when boot msg appears and you'll be presented with options (one of which is to reset to factory defaults)
posted by Cat Pie Hurts at 4:24 PM on March 13, 2008


(If you aren't familiar with serial connectivity, the manual has a fairly thorough guide. Most important will be the serial cable. If you don't have one on hand, you can pick one up for <$10).
posted by Cat Pie Hurts at 4:25 PM on March 13, 2008


I'm reading a version 2 of the manual (caution, large PDF), and Appendix B Troubleshooting basically says you're SOL:

Forgot or lost the password: Contact SMC Technical Support for help.

Hopefully Cat Pie's way works. :-\
posted by hobbes at 4:39 PM on March 13, 2008


sweet!, thanks Cat Pie, I had found the manual but there was only one version of it and it said what hobbes mentioned " call SMC".

But the V1 had the info I was looking for, worked like a charm.

Thanks
posted by brent_h at 4:59 PM on March 13, 2008


« Older See, I told you Macs and PCs don't play nice!   |   Help me help my mean cat! Newer »
This thread is closed to new comments.