Is this monitor worth repairing?
March 1, 2006 12:21 PM
Is this monitor worth repairing?
I 'recovered' a big-ass 19" CRT monitor that someone was throwing away, since without testing it I could tell that one of the problems with it was a badly bent pin on the connector. Once I unbent the pin, I tried it out and the screen is all squished horizontally. I can still see the stuff displayed by the computer, but it's perhaps 2.5 inches wide. It's vertically fine...full heiht of the screen.
Any idea what's failed? Is it worth repairing?
I 'recovered' a big-ass 19" CRT monitor that someone was throwing away, since without testing it I could tell that one of the problems with it was a badly bent pin on the connector. Once I unbent the pin, I tried it out and the screen is all squished horizontally. I can still see the stuff displayed by the computer, but it's perhaps 2.5 inches wide. It's vertically fine...full heiht of the screen.
Any idea what's failed? Is it worth repairing?
I went to a computer fair early this year. Used 19" CRT monitors were selling for $50. Used 17" CRT monitors were selling for half that. To answer your question: The monitor is not worth repairing.
posted by malp at 12:59 PM on March 1, 2006
posted by malp at 12:59 PM on March 1, 2006
Thanks to both of you...good enough then. I'll trash it.
posted by Kickstart70 at 1:01 PM on March 1, 2006
posted by Kickstart70 at 1:01 PM on March 1, 2006
If I may piggyback a question - what's the best way of getting rid of old/broken monitors, especially in Vancouver?
posted by PurplePorpoise at 1:10 PM on March 1, 2006
posted by PurplePorpoise at 1:10 PM on March 1, 2006
Not worth it. We've discarded probably close to 50-75 19"-21" Trinitron-tube multisync monitors over the past year simply because everyone here is moving to LCD flat panels, and nobody *wants* the CRTs anymore. So, we stack the (perfectly working) monitors in the hallway and have a scrapper/recycler come get them.
posted by mrbill at 1:31 PM on March 1, 2006
posted by mrbill at 1:31 PM on March 1, 2006
If I may piggyback a question - what's the best way of getting rid of old/broken monitors, especially in Vancouver?
Check with your local recycling/waste company, or City Hall. There's lead in CRTs, so monitors are hazardous wastes, which usually means either that the city will pick them up for you or that you'll have to go way out of your way to dispose of it.
posted by mendel at 1:49 PM on March 1, 2006
Check with your local recycling/waste company, or City Hall. There's lead in CRTs, so monitors are hazardous wastes, which usually means either that the city will pick them up for you or that you'll have to go way out of your way to dispose of it.
posted by mendel at 1:49 PM on March 1, 2006
What's the current salvage value of copper?
Most CRTs seem to have a ginormous degaussing coil in them, might be 2lbs worth in a 19" monitor.
You will find various other useful parts too, if you are that way inclined...
posted by Chuckles at 2:36 PM on March 1, 2006
Most CRTs seem to have a ginormous degaussing coil in them, might be 2lbs worth in a 19" monitor.
You will find various other useful parts too, if you are that way inclined...
posted by Chuckles at 2:36 PM on March 1, 2006
Speaking of which, if anyone in Seattle would like a free Sony 18 inch Trinitron Multiscan 400 PS, send me an email and you can come and get it.
posted by astruc at 3:51 PM on March 1, 2006
posted by astruc at 3:51 PM on March 1, 2006
PP, call 604-RECYCLE for information.
posted by randomstriker at 11:41 PM on March 1, 2006
posted by randomstriker at 11:41 PM on March 1, 2006
This thread is closed to new comments.
2. No. There are plenty of fully functional CRTs being thrown away right now. Get one of them.
posted by cillit bang at 12:26 PM on March 1, 2006