Kodak Adjustable Safelight Model B manual?
July 31, 2019 10:53 AM Subscribe
I have an old safelight, the Kodak Adjustable Model B, that I need to disassemble to replace power cord which is now stiff and a potential shock hazard. I have been unable to find a manual for it that shows how to take it apart. Anyone have a manual or can explain how to take it apart? Thanks.
Response by poster: I tried that but apparently, that's also part of the "adjustable" feature and I didn't want to force anything.
posted by tommasz at 11:40 AM on July 31, 2019
posted by tommasz at 11:40 AM on July 31, 2019
Force it. Front unscrews. Sometimes dried chemicals makes it get stuck. By "adjustable" it just means you can tilt it on its U bracket.
posted by Sophont at 12:07 PM on July 31, 2019 [1 favorite]
posted by Sophont at 12:07 PM on July 31, 2019 [1 favorite]
Response by poster: I just sprayed some WD-40 around the cap and now I'm waiting to see if it will budge.
posted by tommasz at 1:08 PM on July 31, 2019
posted by tommasz at 1:08 PM on July 31, 2019
Are you sure the lamp socket doesn't unscrew from the back?
From the pictures I've seen it looks like the back section is in two parts, which probably means the part closest to the lamp base is a retaining ring or something that's on a threaded core.
posted by JoeZydeco at 1:35 PM on July 31, 2019 [1 favorite]
From the pictures I've seen it looks like the back section is in two parts, which probably means the part closest to the lamp base is a retaining ring or something that's on a threaded core.
posted by JoeZydeco at 1:35 PM on July 31, 2019 [1 favorite]
Response by poster: The WD-40 worked, it unscrewed reluctantly but came off finally. Unfortunately, now I have to figure out how to remove the socket since unlike most lamps it doesn't screw in or have a retaining ring.
posted by tommasz at 2:24 PM on August 1, 2019
posted by tommasz at 2:24 PM on August 1, 2019
This thread is closed to new comments.
posted by scruss at 11:38 AM on July 31, 2019