skip to main content
6 posts tagged with signal and tv. (View popular tags)
Displaying 1 through 6 of 6. Subscribe:
Wall<>Cable Modem = Good. Wall<>Splitter<>Cable Modem + TV = Intermittent failures where the modem goes off line. What can I do to improve this? Is there such thing as a lower power splitter? Better cables? And did my cable company make a mistake? More details below!
[more inside]
posted by bluelava
on Feb 26, 2013 -
14 answers
I recently bought an Avermedia a327 Mini PCI ATSC (DTV) tuner card which I put in my Dell Vostro 1500. I get horrible signal strength (unwatchable) through the built-in antennas.
[more inside]
posted by lrodman
on Feb 8, 2010 -
11 answers
My friends and I would like to observe the switch-off of analog TV. The FCC has mandated that all analog TV stations stop on February 19, 2009. I'm planning to procure a bunny-eared TV to watch the signal go dead. Can anyone help me pinpoint when this moment is going to be? (This is going to be SO much better than New Year's)
posted by k7lim
on Jan 5, 2009 -
10 answers
Electronics filter: When I connect Dishnetwork straight to my television, the picture is flickery and unwatchable. When I run it through my old VCR first, it's fine.
[more inside]
posted by Pater Aletheias
on Feb 12, 2007 -
7 answers
Some strange problem with my cable TV. I was connecting a new Sylvania DVR/VCR unit in my bedroom. I used to have a Sony DVD/VCR in that same place and the cable reception used to be just fine. First thing I noticed after attaching the new unit is that the signal quality is very poor. But anyway then I come down to living room which has the Comcast's digital set top box connected to the wall outlet. I noticed there was no signal on TV and box was displaying a 'this channel would be available soon' message. Usually that means some kind of bad or no connection. Before I went up to the bedroom everything was running fine. Did plugging in the DVR/VCR unit blow the cable circuit ?
[more inside]
posted by flyby22
on Apr 6, 2006 -
4 answers
Page:
1
