Comments on: Mac OS9 HD Crash

Question: Mac OS9 HD Crash

pinto — Mon, 09 May 2005 15:10:59 -0800

I'm a pc guy, but my friend's imac hard-drive has crashed. I managed to salvage the entire drive on a dvd, but otherwise it's been rendered inoperable. So, my question: can I just copy the appropriate folders (keeping directory structure) from the dvd to the new (essentially empty) drive and have everything work as before? Can I do this for specific software, such as outlook (all saved emails lost!) or word? Or do I have to to a manual re-install of all software, export of emails, etc., as any self-respecting pc would require. Mac OS 9.22

By: fandango_matt

fandango_matt — Mon, 09 May 2005 15:42:24 -0800

You'll need to reformat and initialize the hard drive to clear out the corruption/fragmentation that probably caused the crash--to do this, you need the Software Install/Software Restore CDs that came with the iMac. Put the Software Restore CD in the drive, boot the iMac, and hold down the "C" key to use the CD as the startup disc. Follow the onscreen instructions to reformat/initialize the drive with a new System Folder.

can I just copy the appropriate folders (keeping directory structure) from the dvd to the new (essentially empty) drive and have everything work as before? Can I do this for specific software, such as outlook (all saved emails lost!) or word? Or do I have to to a manual re-install of all software, export of emails, etc., as any self-respecting pc would require.

From the DVD, copy only the documents. Don't bring over the old System folder or any of the applications from the old HD. Applications will need to be reinstalled with their installation discs.

Good luck!

By: RichardP

RichardP — Mon, 09 May 2005 15:43:55 -0800

Pinto, unlike Mac OS X, Mac OS 9 is entirely "Finder drag" installable. If you have a complete copy of the original drive, you can boot the iMac from the software install CD and then "install" the OS, all applications, and all data simply by using the Finder to copy the rescued original data from the DVD drive to the new drive. Next, use the Startup Disk control panel to mark the new hard drive as the boot drive and restart the iMac.

You may find it necessary to "bless" the restored System Folder on the new drive. To do this, start up the iMac from the software install CD. Open the System Folder on the new hard drive. Double-click the System suitcase. After the System suitcase opens, close the suitcase and System Folder windows and restart your computer. If that didn't work, then try the following: drag the System suitcase and Finder out of the System Folder. Close the System Folder. Put the System suitcase and Finder back into the System Folder. If Finder didn't notice that you were copying a System Folder earlier, either of these two procedures should force Finder to take notice of a new System Folder and take the necessary steps to make the system bootable (called "blessing" in Apple parlance).

You can find additional helpful information in Apple's iMac G3 Emergency Handbook.

Make sure you name the new hard drive the same as the old hard drive, otherwise any attempt to use rescued Alias files on the new hard drive may result in the OS asking for help in locating the correct file.

By: kindall

kindall — Mon, 09 May 2005 15:45:37 -0800

You should just be able to copy it all onto the new drive and have it magically work. Mac OS X requires some additional tweakery, but you won't need it with Mac OS 9.