Comments on: Home Network Issue

Question: Home Network Issue

alball — Thu, 11 Nov 2004 06:35:08 -0800

While I am working, every 10 mminutes or so, my Toshiba tablet computer keeps dropping my own home network and informs me that there are other networks available (the neighbors'). How can I tell it to ignore all networks except my own?

By: ed\26h

ed\26h — Thu, 11 Nov 2004 06:41:29 -0800

Whichos?

By: monkeyman

monkeyman — Thu, 11 Nov 2004 06:52:37 -0800

Check and make sure that Windows is not managing your wireless connection. It does not do a good job. You want the Intel software on the job. Open Network Connections and open properties for the Wireless Network Connection. You'll see the check box for windows managing the wireless connection on the wireless networks tab.

By: tuxster

tuxster — Thu, 11 Nov 2004 07:16:33 -0800

1) Open the "Network Connections" (could be visible on your Start Menu, if not, you can find it in the Control Panel).

2) Right click on the "Wireless Network Connection" and select "Properties"

3) Click on the "Wireless Networks" tab.

4) Make sure your home network shows up in the "Preferred Networks" list, if not add it, and move it to the top of the list. Remove any networks you do not recognize on that list.

5) Click the "Advanced..." button. Make sure "Automatically Connect to Non-preferred Networks" option does NOT have a check mark. If there is one, remove it.

That should solve the problem. However, note that it will no longer automatically connect to wireless networks it finds in various locations (i.e., coffee shops). You will have to say "View Available Networks", choose one and manually connect.

By: monkeyman

monkeyman — Thu, 11 Nov 2004 07:43:19 -0800

What model tablet are you using? Does it come with the Intel Proset software?

By: alball

alball — Thu, 11 Nov 2004 09:23:56 -0800

tuxster, there is not an option for "automatically connect to non preferred networks" under the advanced button.

toshiba portege 3505 running windows

By: monkeyman

monkeyman — Thu, 11 Nov 2004 09:30:08 -0800

Is that a Centrino system with Intel software?

By: monkeyman

monkeyman — Thu, 11 Nov 2004 09:45:04 -0800

I looked online and it doesn't look like the 3505 uses the Centrino stuff I am familiar with. I've got a spanking new Portege M200 at work. We've found that the Intel software works much better than the Windows, but that doesn't help you. Can you tell if there is something else installed, maybe Agere software, that controls the wireless connection?

By: tuxster

tuxster — Thu, 11 Nov 2004 11:10:31 -0800

tuxster, there is not an option for "automatically connect to non preferred networks" under the advanced button.

alball, are you sure you looked in the right place? There are two "Advanced"s (classic Microsoft): (1) one is an Advanced tab on the top, beside the "Wireless Networks" tab. (2) The other is an Advanced button at the bottom of the Wireless Networks tab.

I'm talking about the second one, that is you stay on the Wireless Networks tab, and click on the button at the bottom that says "Advanced". It will show you a groups of option buttons titled "Networks to Access" and then below it will be a single checkbox.

It really should be there...

By: alball

alball — Thu, 11 Nov 2004 11:50:27 -0800

tuxster, I found the advanced button, and the checkbox is (and was) not selected. I am still having the problem.

Does anyone know how I can tell the computer to only connect to my AP?

By: Coffeemate

Coffeemate — Thu, 11 Nov 2004 13:04:43 -0800

I have the same problems that alball does, albiet with my HP laptop running XP Pro. While installing SP2 did make it easier to see what was happening, it didn't fix the problem.

What other software is out there that can manage wireless networking connections?

By: tuxster

tuxster — Thu, 11 Nov 2004 14:56:17 -0800

Hmm, alball, can we try one more thing if you don't mind:

did your neighbor's network get readded to the list of preferred networks? If not, try connecting to it once so that it does get readded. Then, select it on the preferred networks tab, choose "properties" button, choose "connection'" tab, unselect "Connect when this network is in range". If you have connections from more than one neighbor, do it for all other connections that you do not wish to connect.

Hopefully, that'll solve the problem.

By: tuxster

tuxster — Thu, 11 Nov 2004 15:45:17 -0800

If that doesn't here is another suggestion from PC Magazine that you might want to try:

http://www.pcmag.com/article2/0,1759,1566989,00.asp

After that, I give up :(

By: alball

alball — Thu, 11 Nov 2004 16:51:01 -0800

thank tuxster, I will give it a try when I get home.